Not all bikes have master rivets. If your bike has a derailleur, it’s unlikely that your chain will have a master link. Bikes that typically do have chains with master links are BMX bikes and one- or three-speed town bikes with internal gears. If the width is 1/8 inch, your chain should have a master rivet.
How often should I change my bike chain?
To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same.
How to Remove Chain Links Without a Chain Breaker Tool
- Locate the section of the chain that you want to separate.
- Place the head of the flathead screwdriver between the middle of the chain and the top plate on the chain, just below where the rivets were in Step 1.
- Repeat steps 1-2 for the exact opposite side of the chain that you removed in the previous steps.
How do I know my bike chain size?
Begin by counting the number of teeth on the largest front sprocket and largest rear. These numbers are often printed right on the sprockets and cogs. Next, measure the distance between the middle of the crank bolt to the rear axle. This is also the chain stay length.
Are bike chains universal?
All modern bicycle chains are made to the “one-half inch pitch” standard, meaning from rivet to rivet is nominally 0.5 inches. The sprocket teeth are cut for this same one-half inch standard to accept bicycle chains. However, this does not mean all makes and models of chains are interchangeable.
How much does it cost to replace a bike chain?
How much does a bike chain cost to replace? Entry level chains can start off around $15.00 with more expensive and higher performance chains ranging from $25.00 to $60.00 or more. More expensive chains increase shift quality and are generally more durable as they wear.