FAQ: How To Size Mountain Bike Handlebars?

How do I know what size handlebars to get my bike?

If you don’t have callipers then you can use a simple measure tape. Just wrap around the bar at the point you want to attach the Oi to get the circumference size and then divide by pi (…. mmm) to get your diameter e.g. 99.9mm / = 31.8mm. If you have no tape, then use a piece of paper (or string).

What width of handlebars do I need?

One of the first factors to consider when choosing a set of handlebars is the width, your bar width should correspond with your shoulder width; measure between the centre of your shoulder sockets and this should provide you with the bar width you need for maximum comfort.

How do I choose mountain bike handlebars?

How to choose your MTB handlebar

  1. First make sure that the diameter at the center of the handlebar, where you tighten your stem, is actually 31.8 mm as 95% of the current MTBs are.
  2. A ‘Riser’, a rise, which is very common in DH, allows to raise your handlebar to rebalance your weight to the rear.
You might be interested:  Question: Where Is Burke Mountain Coquitlam?

Are wider handlebars better?

Making the switch to a narrower handlebar will wake up the front end of your bike making it more twitchy and easier to maneuver; while a wider bar will increase the stability of your front end and provide a calmer feel than before.

Are my handlebars too wide?

Notice the high elbows and shrugged shoulders? If you are most comfortable on your bars in this position, it’s quite possible they are too wide. Optimal shoulder mechanics will be present with a more externally rotated humerus (elbows down slightly).

What width handlebars do the pros use?

For reference, a stock bike that fits the tall Van Schip would come with at least a 44cm-wide handlebar. Some sprinters like Dehaes often use narrower bars, but in the 38-40cm range. Most riders have 40-42cm bars in the pro peloton.

Are drop bars more comfortable?

Drop bars give you more hand positions, which results in superior palm comfort and they offer an aerodynamic advantage over flat bars, while flat bars are easier to handle and maneuver with for beginners and give a more comfortable, upright riding position.

Why are mountain bike bars so wide?

Why are Mountain Bike Handlebars so wide? Mountain bikes have wider handlebars because the wider the riders grip is on the handlebars, the easier it is to transfer input from the hands to the wheel.

Are riser bars better?

Choosing the right amount of rise usually comes down to rider position on the bike. Since gravity bikes are optimized for riding downhill, a riser bar keeps the rider’s head and torso slightly higher on the bike for better control on the descents.

You might be interested:  Question: How Heavy Is A Mountain Lion?

How do I choose rise on handlebars?

Our advice: don’t select the rise of your bar to save weight. On the bike, the 29.2-inch width proved perfect for trail riding. While taller or more aggressive riders may want a wider bar, we found the nearly 30-inch size provides more than enough stability and leverage for all but the most aggressive trails.

What is the best handlebar length for MTB?

The case for an average trail rider to be using a handlebar around 800mm is very unlikely. The best compromise between that extreme length that handlebars have grown to for World Championship downhill racing, and conventional trail riding, appears to be 760mm.

Should I cut my MTB handlebars?

Don’t be afraid to cut your bars down to get the right width perfect for you. Most handlebars nowadays come very wide and there is plenty of extra room to cut them down to size. Just make sure you are using the right tools.

Leave a Comment

Your email address will not be published. Required fields are marked *